Simplicity is the
Ultimate Sophistication
The new generation of
Thermoplastic composite pipe (TCP / RTP ) machinery line system
DN 50 - 160 / DN 200 - 315 / DN 400 - 630
40 %
Pipe Raw Material Savings
Continuous Production
Fully Bonded
Thermoplastic Composite
Pipe (TCP / RTP) Machinery Line
50 %
Pipe Weight Savings
Co - Axis
Worldwide Newest Fiberglass Tap Wrapping Procedure
55°
Enables simultaneous strengthening of the pipe both circumferentially and axially.
360 MM
The maximum single - wrappable fiberglass tape width is upon 360mm, ( Fiberglass tape width generally from 90mm – 360mm
5,000 M
Continuous production of fiberglass TCP pipe only applicable from Co-Axis wrapping technology.


TCP - ULTRA™ Oil & Gas
Extrusion Line System
DN 50 - 160
Onshore & Offshore
30 Mpa Operation Pressure Class
Fiberglass / Carbon Fibre Reinforcement
TCP - WAVE™ Water Supply
DN 200 - 315 / DN 400 - 630
Water Application
Upon 3.5 Mpa Operation Pressure Class
Fiberglass Reinforcement

Extrusion Line System
TCP Pipe Specification - Oil & Gas
4.95 Mpa - 7.34 Mpa
9.34 Mpa - 11.51 Mpa

16.54Mpa - 17.86 Mpa

26.63 Mpa

* To the best of our knowledge, the information contained in data sheets are accurate; however, we do not assume any liability whatsoever for the accuracy and completeness of such information,Nominal value shown, actual value may vary based on different senarios, For more info, please contact Banline International Department. email :owen.chen@banline.com* To the best of our knowledge, the information contained in data sheets are accurate; however, we do not assume any liability whatsoever for the accuracy and completeness of such information,Nominal value shown, actual value may vary based on different senarios, For more info, please contact Banline International Department. email :